From: Tom Rini Date: Tue, 27 Feb 2018 15:08:47 -0500 Subject: [U-Boot] [PATCH] board: am335x: Set serial# variable In-Reply-To: <20180227200543.2367-1-semen.protsenko@linaro.org> References: <20180227200543.2367-1-semen.protsenko@linaro.org> Message-ID: <20180227200847.GY4311@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Feb 27, 2018 at 10:05:43PM +0200, Sam Protsenko wrote: > serial# variable is needed to show device correctly in "fastboot > devices" output. It's useful when we have several devices (in fastboot > mode) connected to single host and want to choose which one to flash. > > Reuse board_serial variable (obtained from EEPROM in > set_board_info_env() function) to set serial#. We can't use > omap_die_id_serial(), because AM335x lacks DIE_ID, as can be seen from > AM335x TRM. The other available option would be to reuse ethaddr > variable, but using board_serial seems more reasonable for this purpose. > > Signed-off-by: Sam Protsenko Does fastboot handle things better or worse than before with board_serial set to "unknown" ? That's a quite likely thing to happen as while serial should be set, but I'm sure there's boards in the wild other than just mine that I might have broken, that do not have the serial field set. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: