From: Gary Bisson Date: Wed, 18 Apr 2018 16:44:48 +0200 Subject: [U-Boot] [PATCH V5 2/2] imx6: sabrelite: update defconfig to use distro defaults In-Reply-To: <20180416124738.6892-3-guillaume.gardet@free.fr> References: <20180412132822.4083-1-guillaume.gardet@free.fr> <20180416124738.6892-1-guillaume.gardet@free.fr> <20180416124738.6892-3-guillaume.gardet@free.fr> Message-ID: <20180418144448.GB2254@t450s.lan> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Guillaume, On Mon, Apr 16, 2018 at 02:47:38PM +0200, Guillaume GARDET wrote: > Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on sabrelite board. > > Signed-off-by: Guillaume GARDET > Cc: Troy Kisky > Cc: Stefano Babic > Cc: Fabio Estevam > Cc: Gary Bisson > > --- > configs/mx6qsabrelite_defconfig | 15 +++++---------- > 1 file changed, 5 insertions(+), 10 deletions(-) > > diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig > index 7499704058..fee33cfff1 100644 > --- a/configs/mx6qsabrelite_defconfig > +++ b/configs/mx6qsabrelite_defconfig > @@ -3,15 +3,15 @@ CONFIG_ARCH_MX6=y > CONFIG_SYS_TEXT_BASE=0x17800000 > CONFIG_TARGET_NITROGEN6X=y > CONFIG_CMD_HDMIDETECT=y > +CONFIG_DISTRO_DEFAULTS=y > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" > CONFIG_BOOTDELAY=3 > +# CONFIG_USE_BOOTCOMMAND is not set > CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > -CONFIG_SUPPORT_RAW_INITRD=y > +CONFIG_ARCH_MISC_INIT=y The above config breaks the build since there's no arch_misc_init function in the board file. > CONFIG_BOARD_EARLY_INIT_F=y > -CONFIG_HUSH_PARSER=y > CONFIG_FASTBOOT=y > CONFIG_FASTBOOT_BUF_ADDR=0x12000000 > -CONFIG_CMD_BOOTZ=y > CONFIG_CMD_MEMTEST=y > CONFIG_SYS_ALT_MEMTEST=y > # CONFIG_CMD_FLASH is not set Also, can you add CMD_GPT so that GPT parition tables are supported? Many of our OS images now rely on it. Regards, Gary