From: andy.tang at nxp.com Date: Fri, 25 May 2018 17:06:45 +0800 Subject: [U-Boot] [PATCH 2/4] armv8: dts: fsl-ls1012a: add sata node support In-Reply-To: <20180525090647.45451-1-andy.tang@nxp.com> References: <20180525090647.45451-1-andy.tang@nxp.com> Message-ID: <20180525090647.45451-2-andy.tang@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Yuantian Tang One ls1012a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature. Signed-off-by: Tang Yuantian --- arch/arm/dts/fsl-ls1012a-rdb.dtsi | 4 ++++ arch/arm/dts/fsl-ls1012a.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+), 0 deletions(-) diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/arch/arm/dts/fsl-ls1012a-rdb.dtsi index 201e5fa..757e2eb 100644 --- a/arch/arm/dts/fsl-ls1012a-rdb.dtsi +++ b/arch/arm/dts/fsl-ls1012a-rdb.dtsi @@ -34,3 +34,7 @@ &duart0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi index be99076..f22cbf4 100644 --- a/arch/arm/dts/fsl-ls1012a.dtsi +++ b/arch/arm/dts/fsl-ls1012a.dtsi @@ -134,6 +134,14 @@ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + sata: sata at 3200000 { + compatible = "fsl,ls1012a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 4>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + usb0: usb2 at 8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; -- 1.7.1