From: Jerome Brunet Subject: [PATCH v3 1/2] ASoC: es7241: add dt-bindings documentation for the es7241 adc Date: Tue, 3 Jul 2018 15:28:44 +0200 Message-ID: <20180703132845.26554-2-jbrunet@baylibre.com> References: <20180703132845.26554-1-jbrunet@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-wr0-f193.google.com (mail-wr0-f193.google.com [209.85.128.193]) by alsa0.perex.cz (Postfix) with ESMTP id AF0012673CB for ; Tue, 3 Jul 2018 15:28:51 +0200 (CEST) Received: by mail-wr0-f193.google.com with SMTP id f18-v6so1978425wre.10 for ; Tue, 03 Jul 2018 06:28:51 -0700 (PDT) In-Reply-To: <20180703132845.26554-1-jbrunet@baylibre.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Liam Girdwood , Mark Brown Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Jerome Brunet List-Id: alsa-devel@alsa-project.org Signed-off-by: Jerome Brunet --- .../devicetree/bindings/sound/everest,es7241.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/everest,es7241.txt diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.txt b/Documentation/devicetree/bindings/sound/everest,es7241.txt new file mode 100644 index 000000000000..28f82cf4959f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es7241.txt @@ -0,0 +1,28 @@ +ES7241 i2s AD converter + +Required properties: +- compatible : "everest,es7241" +- VDDP-supply: regulator phandle for the VDDA supply +- VDDA-supply: regulator phandle for the VDDP supply +- VDDD-supply: regulator phandle for the VDDD supply + +Optional properties: +- reset-gpios: gpio connected to the reset pin +- m0-gpios : gpio connected to the m0 pin +- m1-gpios : gpio connected to the m1 pin +- everest,sdout-pull-down: + Format used by the serial interface is controlled by pulling + the sdout. If the sdout is pulled down, leftj format is used. + If this property is not provided, sdout is assumed to pulled + up and i2s format is used + +Example: + +linein: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + reset-gpios = <&gpio GPIOH_42>; +}; -- 2.14.4