From: Jagan Teki Date: Mon, 16 Jul 2018 13:49:39 +0530 Subject: [U-Boot] [PATCH 08/25] ARM: dts: sun7i: Add mmc0 node for Primo73 tablet In-Reply-To: <20180716081956.32434-1-jagan@amarulasolutions.com> References: <20180716081956.32434-1-jagan@amarulasolutions.com> Message-ID: <20180716081956.32434-9-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Reuse mmc0 node from sun7i-a20.dtsi like other board dts files for Primo73 tablet dts file, and drop in dts mmc0 definition. Cc: Siarhei Siamashka Signed-off-by: Jagan Teki --- arch/arm/dts/sun7i-a20-primo73.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts index 0658f82675..942a955309 100644 --- a/arch/arm/dts/sun7i-a20-primo73.dts +++ b/arch/arm/dts/sun7i-a20-primo73.dts @@ -62,16 +62,6 @@ }; soc at 01c00000 { - mmc0: mmc at 01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - usbphy: phy at 01c13400 { usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; @@ -100,3 +90,13 @@ status = "okay"; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; -- 2.17.1