Return-Path: Date: Wed, 29 Aug 2018 19:45:50 +0300 From: Andy Shevchenko Subject: Re: [PATCH] pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices Message-ID: <20180829164550.GA11447@smile.fi.intel.com> References: <20180827075233.6408-1-hdegoede@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20180827075233.6408-1-hdegoede@redhat.com> List-ID: To: Hans de Goede Cc: Thierry Reding , linux-pwm@vger.kernel.org On Mon, Aug 27, 2018 at 09:52:33AM +0200, Hans de Goede wrote: > The second PWM controller on Cherry Trail devices uses a separate ACPI > HID: "80862289", add this so that the driver will properly bind to the > second PWM controller. > > The second PWM controller is usually not used, the main thing gained by > this is properly putting the PWM controller in D3 on suspend. > Reviewed-by: Andy Shevchenko > Signed-off-by: Hans de Goede > --- > drivers/pwm/pwm-lpss-platform.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pwm/pwm-lpss-platform.c b/drivers/pwm/pwm-lpss-platform.c > index 5561b9e190f8..7304f36ee715 100644 > --- a/drivers/pwm/pwm-lpss-platform.c > +++ b/drivers/pwm/pwm-lpss-platform.c > @@ -81,6 +81,7 @@ static SIMPLE_DEV_PM_OPS(pwm_lpss_platform_pm_ops, > static const struct acpi_device_id pwm_lpss_acpi_match[] = { > { "80860F09", (unsigned long)&pwm_lpss_byt_info }, > { "80862288", (unsigned long)&pwm_lpss_bsw_info }, > + { "80862289", (unsigned long)&pwm_lpss_bsw_info }, > { "80865AC8", (unsigned long)&pwm_lpss_bxt_info }, > { }, > }; > -- > 2.18.0 > -- With Best Regards, Andy Shevchenko