From: Tom Rini Date: Wed, 26 Sep 2018 08:48:37 -0400 Subject: [U-Boot] [U-Boot, v2, 1/3] spi: add support for ARM PL022 SPI controller In-Reply-To: <48118ab3711b919b53f441e5b93524fcdc91e912.1535725061.git-series.quentin.schulz@bootlin.com> References: <48118ab3711b919b53f441e5b93524fcdc91e912.1535725061.git-series.quentin.schulz@bootlin.com> Message-ID: <20180926124837.GM9877@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Aug 31, 2018 at 04:28:29PM +0200, Quentin Schulz wrote: > This adds support for the ARM PL022 SPI controller for the standard > variant (0x00041022) which has a 16bit wide and 8 locations deep TX/RX > FIFO. > > A few parts were borrowed from the Linux kernel driver. > > Cc: Armando Visconti > Cc: Vipin Kumar > Signed-off-by: Quentin Schulz Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: