From: Angelo Dureghello Date: Sun, 14 Oct 2018 00:34:33 +0200 Subject: [U-Boot] [PATCH v3 05/11] drivers: serial: mcfuart: add Kconfig option In-Reply-To: <20181013223439.31998-1-angelo@sysam.it> References: <20181013223439.31998-1-angelo@sysam.it> Message-ID: <20181013223439.31998-5-angelo@sysam.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch adds missing CONFIG_MCFUART to Kconfig. Signed-off-by: Angelo Dureghello --- Changes for v2: - better Kconfig help Changes for v3: - none --- drivers/serial/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 597db4b9cb..1ebeaa3936 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -520,6 +520,15 @@ config MVEBU_A3700_UART Choose this option to add support for UART driver on the Marvell Armada 3700 SoC. The base address is configured via DT. +config MCFUART + bool "Freescale ColdFire UART support" + default n + help + Choose this option to add support for UART driver on the ColdFire + SoC's family. The serial communication channel provides a full-duplex + asynchronous/synchronous receiver and transmitter deriving an + operating frequency from the internal bus clock or an external clock. + config MXC_UART bool "IMX serial port support" depends on MX5 || MX6 -- 2.19.1