Return-Path: From: Sasha Levin To: stable@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Michal Simek , "David S . Miller" , Sasha Levin Subject: [PATCH AUTOSEL 4.18 020/100] net: macb: Clean 64b dma addresses if they are not detected Date: Tue, 16 Oct 2018 00:11:01 -0400 Message-Id: <20181016041221.135528-20-sashal@kernel.org> In-Reply-To: <20181016041221.135528-1-sashal@kernel.org> References: <20181016041221.135528-1-sashal@kernel.org> List-ID: From: Michal Simek [ Upstream commit e1e5d8a9fe737d94ccc0ccbaf0c97f69a8f3e000 ] Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is not detected on 64bit system. The issue was observed when bootloader(u-boot) does not check macb feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support by default. Then macb driver is reading DMACFG register back and only adding 64bit dma configuration but not cleaning it out. Signed-off-by: Michal Simek Acked-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/cadence/macb_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index c4d7479938e2..c11bbf143544 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -2089,6 +2089,7 @@ static void macb_configure_dma(struct macb *bp) else dmacfg &= ~GEM_BIT(TXCOEN); + dmacfg &= ~GEM_BIT(ADDR64); #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT if (bp->hw_dma_cap & HW_DMA_CAP_64B) dmacfg |= GEM_BIT(ADDR64); -- 2.17.1