Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Florian Fainelli , "David S. Miller" Subject: [PATCH 4.14 028/109] net: dsa: bcm_sf2: Fix unbind ordering Date: Tue, 16 Oct 2018 19:04:56 +0200 Message-Id: <20181016170526.602666064@linuxfoundation.org> In-Reply-To: <20181016170524.530541524@linuxfoundation.org> References: <20181016170524.530541524@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Florian Fainelli [ Upstream commit bf3b452b7af787b8bf27de6490dc4eedf6f97599 ] The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/dsa/bcm_sf2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1264,10 +1264,10 @@ static int bcm_sf2_sw_remove(struct plat { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); - /* Disable all ports and interrupts */ priv->wol_ports_mask = 0; - bcm_sf2_sw_suspend(priv->dev->ds); dsa_unregister_switch(priv->dev->ds); + /* Disable all ports and interrupts */ + bcm_sf2_sw_suspend(priv->dev->ds); bcm_sf2_mdio_unregister(priv); return 0;