From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 17 Oct 2018 13:11:02 +0530 Subject: [PATCH v2 09/21] dt-bindings: PCI: keystone: Add bindings to get device control module In-Reply-To: <20181017074114.28239-1-kishon@ti.com> References: <20181017074114.28239-1-kishon@ti.com> Message-ID: <20181017074114.28239-10-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add bindings to get device control module which has the device id and vendor id to be configured in the keystone PCIe controller. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/pci/pci-keystone.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 4dd17de549a7..2030ee0dc4f9 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -19,6 +19,9 @@ pcie_msi_intc : Interrupt controller device node for MSI IRQ chip interrupt-cells: should be set to 1 interrupts: GIC interrupt lines connected to PCI MSI interrupt lines +ti,syscon-pcie-id : phandle to the device control module required to set device + id and vendor id. + Example: pcie_msi_intc: msi-interrupt-controller { interrupt-controller; -- 2.17.1