From: Heiko Stuebner Subject: [PATCH] dt-bindings: hwmon: tmp108: add optional interrupts and #thermal-sensor-cells Date: Wed, 7 Nov 2018 16:47:08 +0100 Message-ID: <20181107154708.422-1-heiko@sntech.de> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, heiko@sntech.de, Heiko Stuebner List-Id: devicetree@vger.kernel.org From: Heiko Stuebner The tmp108 does have an alert output that can be used as interrupt source and can of course also be used as part of a thermal sensor setup for things like thermal-based cpu frequencies, so document the necessary properties. Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/hwmon/tmp108.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt index 8c4b10df86d9..54d4beed4ee5 100644 --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt +++ b/Documentation/devicetree/bindings/hwmon/tmp108.txt @@ -7,6 +7,10 @@ Requires node properties: - compatible : "ti,tmp108" - reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. +Optional properties: +- interrupts: Reference to the TMP108 alert interrupt. +- #thermal-sensor-cells: should be set to 0. + Example: tmp108@48 { compatible = "ti,tmp108"; -- 2.18.0