From: Sergey Matyukevich Date: Tue, 20 Nov 2018 19:31:04 +0300 Subject: [Buildroot] [PATCH next 4/5] configs/solidrun_macchiatobin_mainline: bump kernel and U-Boot In-Reply-To: <2ef4e9d2b5fff465da879d99e412437ea7109b66.1542720610.git.baruch@tkos.co.il> References: <2ef4e9d2b5fff465da879d99e412437ea7109b66.1542720610.git.baruch@tkos.co.il> Message-ID: <20181120163104.wxmaqro2yukllssf@bars> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net > Bump U-Boot to version 2018.11. This version supports autodetection of > SD/eMMC boot source, so we can now enable environment load from SD card. > Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save > device. This avoids stale environment values from the SPI flash. That in > turn, allows to use the more convenient distro boot which is enabled in > the default environment. > > Bump kernel to version 4.19.2. This version enables > CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from > the kernel kconfig fragment. Enable support for SFP modules detection > and configuration. Leave the PHY drivers for now to keep them built into > the kernel. The kernel defconfig builds these drivers as modules. But > that does not work as expected in the default configuration. > > Cc: Sergey Matyukevich > Signed-off-by: Baruch Siach > --- > board/solidrun/macchiatobin/extlinux.conf | 4 ++++ > board/solidrun/macchiatobin/linux-extras.config | 2 +- > board/solidrun/macchiatobin/post-build-mainline.sh | 5 +++++ > board/solidrun/macchiatobin/uboot-fragment.config | 2 ++ > configs/solidrun_macchiatobin_mainline_defconfig | 13 ++++++++----- > 5 files changed, 20 insertions(+), 6 deletions(-) > create mode 100644 board/solidrun/macchiatobin/extlinux.conf > create mode 100755 board/solidrun/macchiatobin/post-build-mainline.sh > create mode 100644 board/solidrun/macchiatobin/uboot-fragment.config Thanks! Verified the changes on MacchiatoBin v2 board: Tested-by: Sergey Matyukevich By the way, it looks like mainline U-Boot v2018.11 still detects only 2GiB of DRAM on my boards. Meanwhile vendor U-Boot provided by alternative config solidrun_macchiatobin_marvell_defconfig detects 4GiB. Regards, Sergey