From: Thomas Petazzoni Date: Mon, 26 Nov 2018 22:12:25 +0100 Subject: [Buildroot] [PATCH v3 5/5] grub2: add usage notes for grub2 arm and aarch64 In-Reply-To: <20180926223719.12604-6-nunes.erico@gmail.com> References: <20180926223719.12604-1-nunes.erico@gmail.com> <20180926223719.12604-6-nunes.erico@gmail.com> Message-ID: <20181126221225.306c3271@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Thu, 27 Sep 2018 00:37:19 +0200, Erico Nunes wrote: > Add notes to test grub2 running on ARM using qemu. The arm section > describes how to run it using u-boot and aarch64 shows how to do it > using efi, which is similar to what has to be done for x86_64. > > The source for OVMF builds is also changed to > https://www.kraxel.org/repos/jenkins/edk2/ which is the source for > nightly builds (as rpms but which can be extracted in any distribution), > as the sourceforge link provided only very old builds. > > Signed-off-by: Erico Nunes > --- > boot/grub2/readme.txt | 140 ++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 136 insertions(+), 4 deletions(-) I'm not sure why you gave all those details for the AArch64/EFI case, instead of just pointing to your aarch64_efi_defconfig configuration. So I've simplified this part to use aarch64_efi_defconfig instead, did some minor formatting fixes here and there, and applied to next. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com