From: Dan Murphy Subject: [[RFC] PATCH v2 0/4] M_CAN framework patches Date: Wed, 5 Dec 2018 13:28:21 -0600 Message-ID: <20181205192825.11555-1-dmurphy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: wg@grandegger.com, mkl@pengutronix.de, davem@davemloft.net Cc: linux-can@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy List-Id: linux-can.vger.kernel.org All This patch series contains no code modifications. Based on Wolfgangs advice I moved the files to different names and committe them independently so they can be reviewed easier. The first patch create the framework code abstracted from the main m_can.c. The second patch adapts the m_can.c to use the framework code The final patches add the TCAN device to the use the m_can framework. Again these patches are RFC and no code modifications were made in v2. I will be updating the code based on this version. Dan Dan Murphy (4): can: m_can: Create a m_can platform framework can: m_can: Migrate the m_can code to use the framework dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver can: tcan4x5x: Add tcan4x5x driver to the kernel .../devicetree/bindings/net/can/tcan4x5x.txt | 34 ++ drivers/net/can/m_can/Kconfig | 18 + drivers/net/can/m_can/Makefile | 4 +- drivers/net/can/m_can/m_can.c | 479 +++++++++--------- drivers/net/can/m_can/m_can_platform.c | 168 ++++++ drivers/net/can/m_can/m_can_platform.h | 100 ++++ drivers/net/can/m_can/tcan4x5x.c | 321 ++++++++++++ 7 files changed, 870 insertions(+), 254 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt create mode 100644 drivers/net/can/m_can/m_can_platform.c create mode 100644 drivers/net/can/m_can/m_can_platform.h create mode 100644 drivers/net/can/m_can/tcan4x5x.c -- 2.20.0.rc2.7.g965798d1f2