From: Daniel Mack Subject: [PATCH 1/2] ASoC: dt-bindings: cs4270: use 'reset-gpios' rather than 'reset-gpio' Date: Thu, 6 Dec 2018 13:24:25 +0100 Message-ID: <20181206122426.28194-1-daniel@zonque.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Daniel Mack List-Id: devicetree@vger.kernel.org Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to switch to the gpiod consume API to handle this correctly. Signed-off-by: Daniel Mack --- Documentation/devicetree/bindings/sound/cs4270.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt index 6b222f9b8ef5..c33770ec4c3c 100644 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -10,8 +10,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. Example: -- 2.19.2