From: Daniel Mack Subject: [PATCH 1/2] ASoC: dt-bindings: ak4104: use 'reset-gpios' rather than 'reset-gpio' Date: Thu, 6 Dec 2018 13:24:56 +0100 Message-ID: <20181206122457.28269-1-daniel@zonque.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Daniel Mack List-Id: devicetree@vger.kernel.org Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to switch to the gpiod consume API to handle this correctly. Signed-off-by: Daniel Mack --- Documentation/devicetree/bindings/sound/ak4104.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt index deca5e18f304..ae5f7f057dc3 100644 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ b/Documentation/devicetree/bindings/sound/ak4104.txt @@ -12,8 +12,8 @@ Required properties: Optional properties: - - reset-gpio : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the device starts. + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the device starts. Example: -- 2.19.2