From: Thierry Reding Subject: [PATCH 3/7] arm64: tegra: Add CEC controller on Tegra186 Date: Thu, 6 Dec 2018 17:50:18 +0100 Message-ID: <20181206165022.23845-3-thierry.reding@gmail.com> References: <20181206165022.23845-1-thierry.reding@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181206165022.23845-1-thierry.reding@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Thierry Reding Cc: linux-tegra@vger.kernel.org, Sameer Pujar , linux-arm-kernel@lists.infradead.org, Jon Hunter List-Id: linux-tegra@vger.kernel.org From: Thierry Reding The CEC controller found on Tegra186 can be used to control consumer devices using the HDMI CEC pin. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 6cea54dc9d35..19fb266c0895 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -352,6 +352,15 @@ interrupt-parent = <&gic>; }; + cec@3960000 { + compatible = "nvidia,tegra186-cec"; + reg = <0x0 0x03960000 0x0 0x10000>; + interrupts = ; + clocks = <&bpmp TEGRA186_CLK_CEC>; + clock-names = "cec"; + status = "disabled"; + }; + hsp_top0: hsp@3c00000 { compatible = "nvidia,tegra186-hsp"; reg = <0x0 0x03c00000 0x0 0xa0000>; -- 2.19.1