From: Tom Rini Date: Thu, 6 Dec 2018 15:30:17 -0500 Subject: [U-Boot] [PATCH] arm: mx5: Enable WDT and bootcounter on M53Menlo In-Reply-To: <20181203221254.16707-1-marex@denx.de> References: <20181203221254.16707-1-marex@denx.de> Message-ID: <20181206203017.GG32109@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Dec 03, 2018 at 11:12:54PM +0100, Marek Vasut wrote: > Enable watchdog and bootcounter support on the M53Menlo board. > > Signed-off-by: Marek Vasut > Cc: Stefano Babic > --- > configs/m53menlo_defconfig | 7 +++++++ > include/configs/m53menlo.h | 5 +++++ > 2 files changed, 12 insertions(+) > > diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig > index 795f8a3ebc..8e26431969 100644 > --- a/configs/m53menlo_defconfig > +++ b/configs/m53menlo_defconfig > @@ -20,6 +20,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y > CONFIG_VERSION_VARIABLE=y > CONFIG_SPL_BOARD_INIT=y > CONFIG_SPL_NAND_SUPPORT=y > +CONFIG_SPL_WATCHDOG_SUPPORT=y > CONFIG_HUSH_PARSER=y > CONFIG_CMD_ASKENV=y > CONFIG_CMD_GREPENV=y > @@ -33,6 +34,7 @@ CONFIG_CMD_DHCP=y > CONFIG_CMD_MII=y > CONFIG_CMD_PING=y > CONFIG_CMD_BMP=y > +CONFIG_CMD_BOOTCOUNT=y > CONFIG_CMD_DATE=y > CONFIG_CMD_BTRFS=y > CONFIG_CMD_EXT4=y > @@ -44,6 +46,11 @@ CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand" > CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)" > CONFIG_CMD_UBI=y > CONFIG_ENV_IS_IN_NAND=y > +CONFIG_BOOTCOUNT_LIMIT=y > +CONFIG_BOOTCOUNT_BOOTLIMIT=3 > +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y > +CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C > +CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041 > CONFIG_FSL_ESDHC=y > CONFIG_NAND=y > CONFIG_NAND_MXC=y > diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h > index 94214b135d..bef0c9b31d 100644 > --- a/include/configs/m53menlo.h > +++ b/include/configs/m53menlo.h > @@ -158,6 +158,11 @@ > /* IIM Fuses */ > #define CONFIG_FSL_IIM > > +/* Watchdog */ > +#define CONFIG_HW_WATCHDOG > +#define CONFIG_IMX_WATCHDOG At least these two symbols are in Kconfig today, please use them (and maybe some guard symbol is missing), thanks. > +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000 This one isn't migrated yet, so I can't complain, only beg for a migration :) -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: