From: Tom Rini Date: Mon, 10 Dec 2018 19:46:29 -0500 Subject: [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20 In-Reply-To: References: <20181210203602.820-1-ezequiel@collabora.com> <2f5a9f56-b519-6f76-efca-3de8d8c42bc3@suse.de> <20181210234133.GD8702@bill-the-cat> Message-ID: <20181211004629.GE8702@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de On Mon, Dec 10, 2018 at 09:27:53PM -0300, Ezequiel Garcia wrote: > On Mon, 2018-12-10 at 18:41 -0500, Tom Rini wrote: > > On Mon, Dec 10, 2018 at 06:31:29PM -0300, Ezequiel Garcia wrote: > > > On Mon, 2018-12-10 at 22:00 +0100, Andreas F=C3=A4rber wrote: > > [snip] > > > > Further, it would be very helpful - given the history of this patch= set - > > > > to indicate which toolchain and version you used for building this. > > > >=20 > > >=20 > > > I've used gcc version 5.3.0 (Sourcery CodeBench Lite 2016.05-8), > > > installed via Buildroot. Wasn't really paying attention to the toolch= ain. > > >=20 > > > I'll test with a recent gcc and post the results. > >=20 > > Just to chime in on this part for now, to be clear, it needs to work > > with the default toolchain buildman uses, which is currently the gcc-7.3 > > kernel.org ones and buildman will fetch one for you. > >=20 >=20 > Done! >=20 > $ strings u-boot | grep GCC > mips-linux-gcc (GCC) 7.3.0 > GCC: (GNU) 7.3.0 > $ strings spl/u-boot-spl | grep GCC > GCC: (GNU) 7.3.0 >=20 > U-Boot 2019.01-rc1-00226-g208679cb9307 (Dec 10 2018 - 21:19:57 -0300) >=20 > CPU: Ingenic JZ4780 > Board: Creator CI20 (rev.1) > DRAM: 1 GiB > MMC: MSC: 0, MSC: 1 > Loading Environment from MMC... OK > In: serial at 10034000 > Out: serial at 10034000 > Err: serial at 10034000 > Net: dm9000 > Hit any key to stop autoboot: 0=20 > =3D> Yay! --=20 Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: