From: Petr =?utf-8?Q?=C5=A0tetiar?= Date: Sun, 16 Dec 2018 01:20:07 +0100 Subject: [U-Boot] U-Boot 2019.01-rc1-00337-g42cc2cf partition table issues on imx6 Message-ID: <20181216002007.GC72796@meh.true.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I'm having problems with my bootscript which works on 2018.03 but is having problems on latest master. I need to run `mmc part` to get it working. U-Boot 2019.01-rc1-00337-g42cc2cf (Dec 16 2018 - 01:02:22 +0100) Model: Toradex Apalis iMX6 Quad 2GB IT V1.1A, Serial# 04875944 # mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device # load mmc 0:1 ${loadaddr} ${script} ** No partition table - mmc 0 ** # mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 32768 5452574f-01 83 Boot 2 36864 524288 5452574f-02 83a # load mmc 0:1 ${loadaddr} ${script} 641 bytes read in 26 ms (23.4 KiB/s) Same problem with `ext4ls`: # mmc dev 0 switch to partitions #0, OK mmc0(part 0) is current device # ext4ls mmc 0:1 ** No partition table - mmc 0 ** # mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 32768 5452574f-01 83 Boot 2 36864 524288 5452574f-02 83 # ext4ls mmc 0:1 4096 . 4096 .. 4096 lost+found 641 boot.scr 47312 imx6q-apalis-ixora.dtb 2521736 uImage -- ynezz