Return-Path: Authentication-Results: lists.ozlabs.org; spf=none (mailfrom) smtp.mailfrom=linux.intel.com (client-ip=192.55.52.151; helo=mga17.intel.com; envelope-from=jae.hyun.yoo@linux.intel.com; receiver=) Authentication-Results: lists.ozlabs.org; dmarc=none (p=none dis=none) header.from=linux.intel.com Received: from mga17.intel.com (mga17.intel.com [192.55.52.151]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 43KFT4676GzDqXr for ; Wed, 19 Dec 2018 11:02:48 +1100 (AEDT) X-Amp-Result: SKIPPED(no attachment in message) X-Amp-File-Uploaded: False Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by fmsmga107.fm.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 18 Dec 2018 16:02:48 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.56,370,1539673200"; d="scan'208";a="128987474" Received: from maru.jf.intel.com ([10.54.51.77]) by fmsmga004.fm.intel.com with ESMTP; 18 Dec 2018 16:02:48 -0800 From: Jae Hyun Yoo To: Joel Stanley , Andrew Jeffery Cc: openbmc@lists.ozlabs.org, Jae Hyun Yoo Subject: [PATCH linux dev-4.19 08/12] mfd: intel-peci-client: Add PECI client MFD driver Date: Tue, 18 Dec 2018 16:02:32 -0800 Message-Id: <20181219000236.30812-9-jae.hyun.yoo@linux.intel.com> X-Mailer: git-send-email 2.19.1 In-Reply-To: <20181219000236.30812-1-jae.hyun.yoo@linux.intel.com> References: <20181219000236.30812-1-jae.hyun.yoo@linux.intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: openbmc@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Development list for OpenBMC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 19 Dec 2018 00:02:50 -0000 This commit adds PECI client MFD driver. Cc: Joel Stanley Cc: Andrew Jeffery Signed-off-by: Jae Hyun Yoo --- drivers/mfd/Kconfig | 14 ++++ drivers/mfd/Makefile | 1 + drivers/mfd/intel-peci-client.c | 150 ++++++++++++++++++++++++++++++++++ include/linux/mfd/intel-peci-client.h | 110 +++++++++++++++++++++++++ 4 files changed, 275 insertions(+) create mode 100644 drivers/mfd/intel-peci-client.c create mode 100644 include/linux/mfd/intel-peci-client.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11841f4b7b2b..66b71a6122d6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -595,6 +595,20 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_INTEL_PECI_CLIENT + bool "Intel PECI client" + depends on (PECI || COMPILE_TEST) + select MFD_CORE + help + If you say yes to this option, support will be included for the + Intel PECI (Platform Environment Control Interface) client. PECI is a + one-wire bus interface that provides a communication channel from PECI + clients in Intel processors and chipset components to external + monitoring or control devices. + + Additional drivers must be enabled in order to use the functionality + of the device. + config MFD_IPAQ_MICRO bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" depends on SA1100_H3100 || SA1100_H3600 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5856a9489cbd..ed05583dc30e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o +obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o obj-$(CONFIG_MFD_PALMAS) += palmas.o obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c new file mode 100644 index 000000000000..d53e4f1078ac --- /dev/null +++ b/drivers/mfd/intel-peci-client.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Intel Corporation + +#include +#include +#include +#include +#include +#include + +#define CPU_ID_MODEL_MASK GENMASK(7, 4) +#define CPU_ID_FAMILY_MASK GENMASK(11, 8) +#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16) +#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20) + +#define LOWER_NIBBLE_MASK GENMASK(3, 0) +#define UPPER_NIBBLE_MASK GENMASK(7, 4) +#define LOWER_BYTE_MASK GENMASK(7, 0) +#define UPPER_BYTE_MASK GENMASK(16, 8) + +enum cpu_gens { + CPU_GEN_HSX = 0, /* Haswell Xeon */ + CPU_GEN_BRX, /* Broadwell Xeon */ + CPU_GEN_SKX, /* Skylake Xeon */ +}; + +static struct mfd_cell peci_functions[] = { + { .name = "peci-cputemp", }, + { .name = "peci-dimmtemp", }, + /* TODO: Add additional PECI sideband functions into here */ +}; + +static const struct cpu_gen_info cpu_gen_info_table[] = { + [CPU_GEN_HSX] = { + .family = 6, /* Family code */ + .model = INTEL_FAM6_HASWELL_X, + .core_max = CORE_MAX_ON_HSX, + .chan_rank_max = CHAN_RANK_MAX_ON_HSX, + .dimm_idx_max = DIMM_IDX_MAX_ON_HSX }, + [CPU_GEN_BRX] = { + .family = 6, /* Family code */ + .model = INTEL_FAM6_BROADWELL_X, + .core_max = CORE_MAX_ON_BDX, + .chan_rank_max = CHAN_RANK_MAX_ON_BDX, + .dimm_idx_max = DIMM_IDX_MAX_ON_BDX }, + [CPU_GEN_SKX] = { + .family = 6, /* Family code */ + .model = INTEL_FAM6_SKYLAKE_X, + .core_max = CORE_MAX_ON_SKX, + .chan_rank_max = CHAN_RANK_MAX_ON_SKX, + .dimm_idx_max = DIMM_IDX_MAX_ON_SKX }, +}; + +static int peci_client_get_cpu_gen_info(struct peci_client_manager *priv) +{ + u32 cpu_id; + u16 family; + u8 model; + int rc; + int i; + + rc = peci_get_cpu_id(priv->client->adapter, priv->client->addr, + &cpu_id); + if (rc) + return rc; + + family = FIELD_PREP(LOWER_BYTE_MASK, + FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id)) | + FIELD_PREP(UPPER_BYTE_MASK, + FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id)); + model = FIELD_PREP(LOWER_NIBBLE_MASK, + FIELD_GET(CPU_ID_MODEL_MASK, cpu_id)) | + FIELD_PREP(UPPER_NIBBLE_MASK, + FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id)); + + for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) { + const struct cpu_gen_info *cpu_info = &cpu_gen_info_table[i]; + + if (family == cpu_info->family && model == cpu_info->model) { + priv->gen_info = cpu_info; + break; + } + } + + if (!priv->gen_info) { + dev_err(priv->dev, "Can't support this CPU: 0x%x\n", cpu_id); + rc = -ENODEV; + } + + return rc; +} + +static int peci_client_probe(struct peci_client *client) +{ + struct device *dev = &client->dev; + struct peci_client_manager *priv; + uint cpu_no; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + priv->client = client; + priv->dev = dev; + cpu_no = client->addr - PECI_BASE_ADDR; + + ret = peci_client_get_cpu_gen_info(priv); + if (ret) + return ret; + + ret = devm_mfd_add_devices(priv->dev, cpu_no, peci_functions, + ARRAY_SIZE(peci_functions), NULL, 0, NULL); + if (ret < 0) { + dev_err(priv->dev, "Failed to register child devices: %d\n", + ret); + return ret; + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id peci_client_of_table[] = { + { .compatible = "intel,peci-client" }, + { } +}; +MODULE_DEVICE_TABLE(of, peci_client_of_table); +#endif + +static const struct peci_device_id peci_client_ids[] = { + { .name = "peci-client" }, + { } +}; +MODULE_DEVICE_TABLE(peci, peci_client_ids); + +static struct peci_driver peci_client_driver = { + .probe = peci_client_probe, + .id_table = peci_client_ids, + .driver = { + .name = "peci-client", + .of_match_table = of_match_ptr(peci_client_of_table), + }, +}; +module_peci_driver(peci_client_driver); + +MODULE_AUTHOR("Jae Hyun Yoo "); +MODULE_DESCRIPTION("PECI client driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h new file mode 100644 index 000000000000..8f6d823a59cd --- /dev/null +++ b/include/linux/mfd/intel-peci-client.h @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018 Intel Corporation */ + +#ifndef __LINUX_MFD_INTEL_PECI_CLIENT_H +#define __LINUX_MFD_INTEL_PECI_CLIENT_H + +#include + +#if IS_ENABLED(CONFIG_X86) +#include +#else +/** + * Architectures other than x86 cannot include the header file so define these + * at here. These are needed for detecting type of client x86 CPUs behind a PECI + * connection. + */ +#define INTEL_FAM6_HASWELL_X 0x3F +#define INTEL_FAM6_BROADWELL_X 0x4F +#define INTEL_FAM6_SKYLAKE_X 0x55 +#endif + +#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */ +#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */ +#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */ + +#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */ +#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */ +#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */ + +#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */ +#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */ +#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */ + +#define CORE_NUMS_MAX CORE_MAX_ON_SKX +#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX +#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX +#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX) + +/** + * struct cpu_gen_info - CPU generation specific information + * @family: CPU family ID + * @model: CPU model + * @core_max: max number of cores + * @chan_rank_max: max number of channel ranks + * @dimm_idx_max: max number of DIMM indices + * + * CPU generation specific information to identify maximum number of cores and + * DIMM slots. + */ +struct cpu_gen_info { + u16 family; + u8 model; + uint core_max; + uint chan_rank_max; + uint dimm_idx_max; +}; + +/** + * struct peci_client_manager - PECI client manager information + * @client; pointer to the PECI client + * @dev: pointer to the struct device + * @name: PECI client manager name + * @gen_info: CPU generation info of the detected CPU + * + * PECI client manager information for managing PECI sideband functions on a CPU + * client. + */ +struct peci_client_manager { + struct peci_client *client; + struct device *dev; + char name[PECI_NAME_SIZE]; + const struct cpu_gen_info *gen_info; +}; + +/** + * peci_client_read_package_config - read from the Package Configuration Space + * @priv: driver private data structure + * @index: encoding index for the requested service + * @param: parameter to specify the exact data being requested + * @data: data buffer to store the result + * Context: can sleep + * + * A generic PECI command that provides read access to the + * "Package Configuration Space" that is maintained by the PCU, including + * various power and thermal management functions. Typical PCS read services + * supported by the processor may include access to temperature data, energy + * status, run time information, DIMM temperatures and so on. + * + * Return: zero on success, else a negative error code. + */ +static inline int +peci_client_read_package_config(struct peci_client_manager *priv, + u8 index, u16 param, u8 *data) +{ + struct peci_rd_pkg_cfg_msg msg; + int rc; + + msg.addr = priv->client->addr; + msg.index = index; + msg.param = param; + msg.rx_len = 4; + + rc = peci_command(priv->client->adapter, PECI_CMD_RD_PKG_CFG, &msg); + if (!rc) + memcpy(data, msg.pkg_config, 4); + + return rc; +} + +#endif /* __LINUX_MFD_INTEL_PECI_CLIENT_H */ -- 2.7.4