From: Tom Rini Date: Fri, 11 Jan 2019 09:44:03 -0500 Subject: [U-Boot] [PATCH 2/2] board: tbs2910: Remove FIT support in defconfig to reduce u-boot size In-Reply-To: References: <63e7db53-dcaa-35cf-0d0e-f7bf5483c5c8@web.de> <20190109223917.GA5463@bill-the-cat> <3077c9c2-5955-abbe-4adc-75ac7361457b@denx.de> <20190110155653.GA5463@bill-the-cat> <42c46a8c-c412-45df-0632-72fc27343212@gmail.com> <20190110165432.GC5463@bill-the-cat> Message-ID: <20190111144403.GJ5463@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Jan 11, 2019 at 08:22:45AM +0100, Simon Goldschmidt wrote: > On Thu, Jan 10, 2019 at 5:54 PM Tom Rini wrote: > > > > On Thu, Jan 10, 2019 at 05:36:11PM +0100, Simon Goldschmidt wrote: > > > Am 10.01.2019 um 16:56 schrieb Tom Rini: > > > >On Thu, Jan 10, 2019 at 09:11:53AM +0100, Simon Goldschmidt wrote: > > > >>On Thu, Jan 10, 2019 at 9:00 AM Stefano Babic wrote: > > > >>> > > > >>>Hi Tom, Soeren, > > > >>> > > > >>>On 09/01/19 23:39, Tom Rini wrote: > > > >>>>On Wed, Jan 09, 2019 at 05:01:37PM +0100, Stefano Babic wrote: > > > >>>>>Hi Soeren, > > > >>>>> > > > >>>>>On 08/01/19 12:03, Soeren Moch wrote: > > > >>>>>>Hi Stefano, > > > >>>>>> > > > >>>>>>On 08.01.19 11:24, Stefano Babic wrote: > > > >>>>>>>Hi Soeren, > > > >>>>>>> > > > >>>>>>>On 08/01/19 11:14, Soeren Moch wrote: > > > >>>>>>>>Stefano, > > > >>>>>>>> > > > >>>>>>>>can you apply this for v2019.01? This is really a important fix to avoid > > > >>>>>>>> environment and u-boot binary overwriting each other. > > > >>>>>>>>It is also a small local fix which cannot hurt anybody else. > > > >>>>>>>I will apply and I send a new PR. This is not the first fix in this > > > >>>>>>>direction, u-boot becomes pretty large, it is becoming a common problem. > > > >>>>>>> > > > >>>>>>Thank you very much. > > > >>>>>> > > > >>>>>>Yes, "in the good old days (tm)" there was much effort put into not > > > >>>>>>increasing the binary size for existing boards when adding new features. > > > >>>>> > > > >>>>>Right, fully agree. > > > >>>>> > > > >>>>>>Unfortunately this is not true anymore. > > > >>>>> > > > >>>>>I get in the same trouble with more as one project. A previous rule of > > > >>>>>thumb was to reserve 512KB to the bootloader because it was pretty > > > >>>>>unthinkable that bootloader could be larger. Mhmmhh....this remember me > > > >>>>>someone else who said that 640Kb is enough for everything. > > > >>>>> > > > >>>>>Anyway, as you noted, this is a big problem in field and it makes > > > >>>>>difficult an upgrade without returning back the device to factory, what > > > >>>>>nobody wants. > > > >>>> > > > >>>>So, this is more on me, so I should probably explain a little, and point > > > >>>>at the biggest culprit too. The biggest at times culprit and sometimes > > > >>>>controversial thing is that we default to the EFI subsystem being on by > > > >>>>default. This is 50KiB on tbs2910. > > > >>> > > > >>>I am not sure if we should point to EFI as responsible for the increased > > > >>>footprint or it is due to the sum of several components / factors. I > > > >>>just report my experience in last month : I had to port U-Boot for a > > > >>>customer from a not very old release (2017.01) to the current. 2017.01 > > > >>>had already (apart of FIT support) all features the customer needed, but > > > >>>there are issues(NAND, UBI) and I kew that they were solved later. > > > >>>Processor was an old PowerPC 8308, a quite dead SOC. I have not changed > > > >>>a lot in board code, but of course I had to reconfigure a lot. At the > > > >>>end, everything worked but I was quite astonished about footprint. I had: > > > >>> > > > >>>2017.01 u-boot.bin 443452 > > > >>>2018.11 u-boot.bin 654684 > > > >>> > > > >>> But the new footprint overwrote the space for the env, and I had to > > > >>>change the layout.It was not something that I could not manage and in > > > >>>this specific case, customer could handle it. I cannot say I did > > > >>>something pretty wrong to bloat the bootloader, so my feeling was that > > > >>>there is not a specific part responsible for the increased size, but > > > >>>each component is slightly bigger and they sizes sum at the end. > > > >>> > > > >>> > > > >>>> Why default? Well, "everyone" > > > >>>>agrees that defaulting to EFI application support means the widest > > > >>>>choice of out of the box software support. > > > >>> > > > >>>I am unsure about this - just my two cents. > > > >>> > > > >>>I agree with you if we are talking about evaluation boards and / or > > > >>>boards supposed to run different distros (or in any case, more flavour > > > >>>of software). > > > >>> > > > >>>But there are a lot of "custom" boards (maintained in U-Boot) that runs > > > >>>for a specific project and won't run any other kind of software. If a > > > >>>device is a navigation system, a network controller, or whatever, it > > > >>>will just do this job until its EOL. > > > >>> > > > >>>Specially for older boards, a new feature should not be activated as > > > >>>default. At the beginning, police in U-Boot was to set just what should > > > >>>be required in the bootloader, without setting what is not needed as > > > >>>default. So default was off instead of on. > > > >> > > > >>I aslo think that would suit U-Boot better. For example, I have one > > > >>configuration where I need to squeeze U-Boot into 204 KiB. For me this > > > >>currently means I have to re-check the defconfig for every update to > > > >>disable new features that are now on by default. I think having those > > > >>default to off and enabling them via defconfig if required would be better. > > > > > > > >Can SoCFPGA not set the option to make a link failure if you grow beyond > > > >204KiB? As part of this thread, the only new default y thing since > > > >v2018.01 at least is CRC16-CCITT support in "hash". > > > > > > Well, this is a non-mainline config. Plus I keep having problems with the > > > size check in that it does not account for the DTB. Wait, that was for SPL, > > > how do you enable a size check for U-Boot? > > > > We have CONFIG_BOARD_SIZE_LIMIT, which I would be unsurprised to learn > > also needs to be used in just a few more targets in the top-level > > Makefile. > > So I just tried that and it doesn't really work as the size checked is without > DTB and without image header. These two add up to nearly 20 KiB on my board, > so a size check without them is not really worth anything. > > I'll send a patch to check the size of u-boot.img Thanks. This is another one of those great features that's not used / plumbed in widely enough. It's a bug that it's not in use in the areas where we have DTB + image header. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: