From: Dan Murphy Subject: [PATCH v3 0/4] M_CAN Framework Date: Fri, 11 Jan 2019 11:32:32 -0600 Message-ID: <20190111173236.14329-1-dmurphy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: wg@grandegger.com, mkl@pengutronix.de, davem@davemloft.net, b29396@freescale.com Cc: linux-can@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy List-Id: linux-can.vger.kernel.org All Well it has taken me a while to get this working and ported to a provide a m_can framework that manages the Bosch m_can stack and abstracts away devices to use that framework. The m_can.c is the framework that devices register to. The device abstractions can provide read/write capability as well as bit timings and also provide any other initializations that are device specific. The m_can platform code will need to be updated as I have not tested this code. The tcan code is working. Dan Dan Murphy (4): can: m_can: Create a m_can platform framework can: m_can: Migrate the m_can code to use the framework dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver can: tcan4x5x: Add tcan4x5x driver to the kernel .../devicetree/bindings/net/can/tcan4x5x.txt | 37 + drivers/net/can/m_can/Kconfig | 18 + drivers/net/can/m_can/Makefile | 4 +- drivers/net/can/m_can/m_can.c | 765 +++++++++--------- drivers/net/can/m_can/m_can_platform.c | 212 +++++ drivers/net/can/m_can/m_can_platform.h | 163 ++++ drivers/net/can/m_can/tcan4x5x.c | 458 +++++++++++ 7 files changed, 1253 insertions(+), 404 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt create mode 100644 drivers/net/can/m_can/m_can_platform.c create mode 100644 drivers/net/can/m_can/m_can_platform.h create mode 100644 drivers/net/can/m_can/tcan4x5x.c -- 2.20.1.98.gecbdaf0899