From: Tom Rini Date: Tue, 15 Jan 2019 21:24:31 -0500 Subject: [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc In-Reply-To: <20190115085858.618bd4d9@jawa> References: <20190114141740.20429-1-lukma@denx.de> <20190114141740.20429-2-lukma@denx.de> <20190114143000.GD5463@bill-the-cat> <20190115085858.618bd4d9@jawa> Message-ID: <20190116022431.GI27429@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Jan 15, 2019 at 08:58:58AM +0100, Lukasz Majewski wrote: > Hi Tom, > > > On Mon, Jan 14, 2019 at 03:17:20PM +0100, Lukasz Majewski wrote: > > > > > This property is necessary to allow pinctrl configuration before > > > relocation (uart, DDR pins). > > > > > > Separate file will facilitate updating vf.dtsi from the Linux > > > kernel. > > > > > > Signed-off-by: Lukasz Majewski > > > --- > > > > > > arch/arm/dts/vf-u-boot.dtsi | 11 +++++++++++ > > > arch/arm/dts/vf.dtsi | 1 + > > > 2 files changed, 12 insertions(+) > > > create mode 100644 arch/arm/dts/vf-u-boot.dtsi > > > > We should call the file 'vf610-u-boot.dtsi' which will get it > > automatically included in all vf610 platforms but still allow boards > > that need their own -u-boot.dtsi file to #include vf610-u-boot.dtsi > > > > Please forgive me but I do have a hard time to parse the above sentence. > > Do you propose to: > > 1. Rename vf-u-boot.dtsi -> vf610-u-boot.dtsi ? > > And then just include it in the generic (easily ported from Linux) > vf.dtsi file? > > or > > 2. Shall I rename vf-u-boot.dtsi -> vf610-u-boot.dtsi and then do not > include it into vf.dtsi, but it shall be included in board dts files > (like bk4.dtsi) ? Neither exactly. See scripts/Makefile.lib for the rules that automatically pick up various -u-boot.dtsi suffixed files. "vf610" will be picked up and "vf" will not. You do _not_ need include it in other non "-u-boot.dtsi" files. You will likely end up with vf610-bk4-u-boot.dtsi or something to both set stdout-path under /chosen and #include vf610-u-boot.dtsi. If you don't need a board specific -u-boot.dtsi file then just vf610-u-boot.dtsi gets picked up automatically and you're done. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: