From: Stefan Roese Date: Fri, 18 Jan 2019 12:46:41 +0100 Subject: [U-Boot] [PATCH 2/3 v2] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20 In-Reply-To: <20190118114642.19412-1-sr@denx.de> References: <20190118114642.19412-1-sr@denx.de> Message-ID: <20190118114642.19412-4-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de This patch sync's the PCIe DT nodes with the recent Linux v4.20 version. This change makes it easier to reference specific PCIe nodes in the board dts files to e.g. enable a PCIe port as this is now necessary with the new DM PCI driver for these platforms. Signed-off-by: Stefan Roese Cc: Dirk Eibach Cc: Mario Six Cc: Chris Packham Cc: Phil Sutter Cc: Marek Beh=C3=BAn Cc: VlaoMao Cc: Tom Rini --- v2: - New file arch/arm/dts/armada-375.dtsi | 8 +++++--- arch/arm/dts/armada-xp-mv78230.dtsi | 17 +++++++++------ arch/arm/dts/armada-xp-mv78260.dtsi | 29 +++++++++++++++++--------- arch/arm/dts/armada-xp-mv78460.dtsi | 32 +++++++++++++++++++---------- 4 files changed, 56 insertions(+), 30 deletions(-) diff --git a/arch/arm/dts/armada-375.dtsi b/arch/arm/dts/armada-375.dtsi index 249c41c757..62a548a55f 100644 --- a/arch/arm/dts/armada-375.dtsi +++ b/arch/arm/dts/armada-375.dtsi @@ -582,7 +582,7 @@ }; }; =20 - pcie-controller { + pciec: pcie at 82000000 { compatible =3D "marvell,armada-370-pcie"; status =3D "disabled"; device_type =3D "pci"; @@ -601,7 +601,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>; =20 - pcie at 1,0 { + pcie0: pcie at 1,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x40000 0 0x2000>; reg =3D <0x0800 0 0 0 0>; @@ -610,6 +610,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port =3D <0>; @@ -618,7 +619,7 @@ status =3D "disabled"; }; =20 - pcie at 2,0 { + pcie1: pcie at 2,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x44000 0 0x2000>; reg =3D <0x1000 0 0 0 0>; @@ -627,6 +628,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port =3D <0>; diff --git a/arch/arm/dts/armada-xp-mv78230.dtsi b/arch/arm/dts/armada-xp-m= v78230.dtsi index 6e6d0f04bf..f6bab9fb20 100644 --- a/arch/arm/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/dts/armada-xp-mv78230.dtsi @@ -86,7 +86,7 @@ * configured as x4 or quad x1 lanes. One unit is * x1 only. */ - pcie-controller { + pciec: pcie at 82000000 { compatible =3D "marvell,armada-xp-pcie"; status =3D "disabled"; device_type =3D "pci"; @@ -114,7 +114,7 @@ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; =20 - pcie at 1,0 { + pcie1: pcie at 1,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x40000 0 0x2000>; reg =3D <0x0800 0 0 0 0>; @@ -123,6 +123,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 58>; marvell,pcie-port =3D <0>; @@ -131,7 +132,7 @@ status =3D "disabled"; }; =20 - pcie at 2,0 { + pcie2: pcie at 2,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x44000 0 0x2000>; reg =3D <0x1000 0 0 0 0>; @@ -140,6 +141,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 59>; marvell,pcie-port =3D <0>; @@ -148,7 +150,7 @@ status =3D "disabled"; }; =20 - pcie at 3,0 { + pcie3: pcie at 3,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x48000 0 0x2000>; reg =3D <0x1800 0 0 0 0>; @@ -157,6 +159,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 60>; marvell,pcie-port =3D <0>; @@ -165,7 +168,7 @@ status =3D "disabled"; }; =20 - pcie at 4,0 { + pcie4: pcie at 4,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x4c000 0 0x2000>; reg =3D <0x2000 0 0 0 0>; @@ -174,6 +177,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 61>; marvell,pcie-port =3D <0>; @@ -182,7 +186,7 @@ status =3D "disabled"; }; =20 - pcie at 5,0 { + pcie5: pcie at 5,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x80000 0 0x2000>; reg =3D <0x2800 0 0 0 0>; @@ -191,6 +195,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 62>; marvell,pcie-port =3D <1>; diff --git a/arch/arm/dts/armada-xp-mv78260.dtsi b/arch/arm/dts/armada-xp-m= v78260.dtsi index c5fdc99f0d..d39231f69d 100644 --- a/arch/arm/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/dts/armada-xp-mv78260.dtsi @@ -87,7 +87,7 @@ * configured as x4 or quad x1 lanes. One unit is * x4 only. */ - pcie-controller { + pciec: pcie at 82000000 { compatible =3D "marvell,armada-xp-pcie"; status =3D "disabled"; device_type =3D "pci"; @@ -129,7 +129,7 @@ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; =20 - pcie at 1,0 { + pcie1: pcie at 1,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x40000 0 0x2000>; reg =3D <0x0800 0 0 0 0>; @@ -138,6 +138,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 58>; marvell,pcie-port =3D <0>; @@ -146,7 +147,7 @@ status =3D "disabled"; }; =20 - pcie at 2,0 { + pcie2: pcie at 2,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x44000 0 0x2000>; reg =3D <0x1000 0 0 0 0>; @@ -155,6 +156,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 59>; marvell,pcie-port =3D <0>; @@ -163,7 +165,7 @@ status =3D "disabled"; }; =20 - pcie at 3,0 { + pcie3: pcie at 3,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x48000 0 0x2000>; reg =3D <0x1800 0 0 0 0>; @@ -172,6 +174,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 60>; marvell,pcie-port =3D <0>; @@ -180,7 +183,7 @@ status =3D "disabled"; }; =20 - pcie at 4,0 { + pcie4: pcie at 4,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x4c000 0 0x2000>; reg =3D <0x2000 0 0 0 0>; @@ -189,6 +192,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 61>; marvell,pcie-port =3D <0>; @@ -197,7 +201,7 @@ status =3D "disabled"; }; =20 - pcie at 5,0 { + pcie5: pcie at 5,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x80000 0 0x2000>; reg =3D <0x2800 0 0 0 0>; @@ -206,6 +210,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 62>; marvell,pcie-port =3D <1>; @@ -214,7 +219,7 @@ status =3D "disabled"; }; =20 - pcie at 6,0 { + pcie6: pcie at 6,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x84000 0 0x2000>; reg =3D <0x3000 0 0 0 0>; @@ -223,6 +228,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 63>; marvell,pcie-port =3D <1>; @@ -231,7 +237,7 @@ status =3D "disabled"; }; =20 - pcie at 7,0 { + pcie7: pcie at 7,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x88000 0 0x2000>; reg =3D <0x3800 0 0 0 0>; @@ -240,6 +246,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 64>; marvell,pcie-port =3D <1>; @@ -248,7 +255,7 @@ status =3D "disabled"; }; =20 - pcie at 8,0 { + pcie8: pcie at 8,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x8c000 0 0x2000>; reg =3D <0x4000 0 0 0 0>; @@ -257,6 +264,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 65>; marvell,pcie-port =3D <1>; @@ -265,7 +273,7 @@ status =3D "disabled"; }; =20 - pcie at 9,0 { + pcie9: pcie at 9,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x42000 0 0x2000>; reg =3D <0x4800 0 0 0 0>; @@ -274,6 +282,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 99>; marvell,pcie-port =3D <2>; diff --git a/arch/arm/dts/armada-xp-mv78460.dtsi b/arch/arm/dts/armada-xp-m= v78460.dtsi index 0e24f1a385..c642565d1b 100644 --- a/arch/arm/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/dts/armada-xp-mv78460.dtsi @@ -104,7 +104,7 @@ * configured as x4 or quad x1 lanes. Two units are * x4/x1. */ - pcie-controller { + pciec: pcie at 82000000 { compatible =3D "marvell,armada-xp-pcie"; status =3D "disabled"; device_type =3D "pci"; @@ -150,7 +150,7 @@ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; =20 - pcie at 1,0 { + pcie1: pcie at 1,0 { device_type =3D "pci"; assigned-addresses =3D <0x82000800 0 0x40000 0 0x2000>; reg =3D <0x0800 0 0 0 0>; @@ -159,6 +159,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 58>; marvell,pcie-port =3D <0>; @@ -167,7 +168,7 @@ status =3D "disabled"; }; =20 - pcie at 2,0 { + pcie2: pcie at 2,0 { device_type =3D "pci"; assigned-addresses =3D <0x82001000 0 0x44000 0 0x2000>; reg =3D <0x1000 0 0 0 0>; @@ -176,6 +177,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 59>; marvell,pcie-port =3D <0>; @@ -184,7 +186,7 @@ status =3D "disabled"; }; =20 - pcie at 3,0 { + pcie3: pcie at 3,0 { device_type =3D "pci"; assigned-addresses =3D <0x82001800 0 0x48000 0 0x2000>; reg =3D <0x1800 0 0 0 0>; @@ -193,6 +195,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 60>; marvell,pcie-port =3D <0>; @@ -201,7 +204,7 @@ status =3D "disabled"; }; =20 - pcie at 4,0 { + pcie4: pcie at 4,0 { device_type =3D "pci"; assigned-addresses =3D <0x82002000 0 0x4c000 0 0x2000>; reg =3D <0x2000 0 0 0 0>; @@ -210,6 +213,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 61>; marvell,pcie-port =3D <0>; @@ -218,7 +222,7 @@ status =3D "disabled"; }; =20 - pcie at 5,0 { + pcie5: pcie at 5,0 { device_type =3D "pci"; assigned-addresses =3D <0x82002800 0 0x80000 0 0x2000>; reg =3D <0x2800 0 0 0 0>; @@ -227,6 +231,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x5 0 1 0 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 62>; marvell,pcie-port =3D <1>; @@ -235,7 +240,7 @@ status =3D "disabled"; }; =20 - pcie at 6,0 { + pcie6: pcie at 6,0 { device_type =3D "pci"; assigned-addresses =3D <0x82003000 0 0x84000 0 0x2000>; reg =3D <0x3000 0 0 0 0>; @@ -244,6 +249,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x6 0 1 0 0x81000000 0 0 0x81000000 0x6 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 63>; marvell,pcie-port =3D <1>; @@ -252,7 +258,7 @@ status =3D "disabled"; }; =20 - pcie at 7,0 { + pcie7: pcie at 7,0 { device_type =3D "pci"; assigned-addresses =3D <0x82003800 0 0x88000 0 0x2000>; reg =3D <0x3800 0 0 0 0>; @@ -261,6 +267,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x7 0 1 0 0x81000000 0 0 0x81000000 0x7 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 64>; marvell,pcie-port =3D <1>; @@ -269,7 +276,7 @@ status =3D "disabled"; }; =20 - pcie at 8,0 { + pcie8: pcie at 8,0 { device_type =3D "pci"; assigned-addresses =3D <0x82004000 0 0x8c000 0 0x2000>; reg =3D <0x4000 0 0 0 0>; @@ -278,6 +285,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x8 0 1 0 0x81000000 0 0 0x81000000 0x8 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 65>; marvell,pcie-port =3D <1>; @@ -286,7 +294,7 @@ status =3D "disabled"; }; =20 - pcie at 9,0 { + pcie9: pcie at 9,0 { device_type =3D "pci"; assigned-addresses =3D <0x82004800 0 0x42000 0 0x2000>; reg =3D <0x4800 0 0 0 0>; @@ -295,6 +303,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0x9 0 1 0 0x81000000 0 0 0x81000000 0x9 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 99>; marvell,pcie-port =3D <2>; @@ -303,7 +312,7 @@ status =3D "disabled"; }; =20 - pcie at 10,0 { + pcie10: pcie at a,0 { device_type =3D "pci"; assigned-addresses =3D <0x82005000 0 0x82000 0 0x2000>; reg =3D <0x5000 0 0 0 0>; @@ -312,6 +321,7 @@ #interrupt-cells =3D <1>; ranges =3D <0x82000000 0 0 0x82000000 0xa 0 1 0 0x81000000 0 0 0x81000000 0xa 0 1 0>; + bus-range =3D <0x00 0xff>; interrupt-map-mask =3D <0 0 0 0>; interrupt-map =3D <0 0 0 0 &mpic 103>; marvell,pcie-port =3D <3>; --=20 2.20.1