From: Martin Kepplinger Subject: [PATCH 1/2] dt-bindings: input: sitronix-st1232: document optional reset-gpios property Date: Tue, 29 Jan 2019 11:23:46 +0100 Message-ID: <20190129102347.27754-1-martink@posteo.de> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-kernel@vger.kernel.org, Martin Kepplinger List-Id: devicetree@vger.kernel.org From: Martin Kepplinger The st1232 driver reads this via gpiod. Signed-off-by: Martin Kepplinger --- .../devicetree/bindings/input/touchscreen/sitronix-st1232.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt index e73e826e0f2a..365b32d30d4b 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt @@ -8,7 +8,7 @@ Required properties: - interrupts: interrupt to which the chip is connected Optional properties: -- gpios: a phandle to the reset GPIO +- reset-gpios: a phandle to the reset GPIO Example: @@ -19,7 +19,7 @@ Example: compatible = "sitronix,st1232"; reg = <0x55>; interrupts = <2 0>; - gpios = <&gpio1 166 0>; + reset-gpios = <&gpio1 166 0>; }; /* ... */ -- 2.20.1