From: Alexander Dahl Date: Wed, 6 Feb 2019 15:19:41 +0100 Subject: [U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant In-Reply-To: <20190206141941.24802-1-ada@thorsis.com> References: <20190206141941.24802-1-ada@thorsis.com> Message-ID: <20190206141941.24802-3-ada@thorsis.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de This was already set for 'sama5d27_som1_ek_mmc_defconfig' (first SD card, full size). Without this option set, the MAC address is not read from the I=C2=B2C EEPROM at boot, and remains unset: U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000) CPU: SAMA5D27 1G bits DDR2 SDRAM Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz DRAM: 128 MiB MMC: sdio-host at a0000000: 0, sdio-host at b0000000: 1 Loading Environment from FAT... OK In: serial Out: serial Err: serial Net: Error: ethernet at f8008000 address not set. eth-1: ethernet at f8008000 Hit any key to stop autoboot: 0 Signed-off-by: Alexander Dahl --- configs/sama5d27_som1_ek_mmc1_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som= 1_ek_mmc1_defconfig index 5f4abe8605..9ba8d79e31 100644 --- a/configs/sama5d27_som1_ek_mmc1_defconfig +++ b/configs/sama5d27_som1_ek_mmc1_defconfig @@ -23,6 +23,7 @@ CONFIG_SD_BOOT=3Dy CONFIG_BOOTDELAY=3D3 CONFIG_USE_BOOTARGS=3Dy CONFIG_BOOTARGS=3D"console=3DttyS0,115200 earlyprintk root=3D/dev/mmcblk1p= 2 rw rootwait" +CONFIG_MISC_INIT_R=3Dy # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_SEPARATE_BSS=3Dy CONFIG_HUSH_PARSER=3Dy --=20 2.11.0