From: Tom Rini Date: Sun, 10 Feb 2019 08:09:36 -0500 Subject: [U-Boot] mmc: omap_hsmmc: Workaround errata regarding SDR104/HS200 tuning failures (i929) In-Reply-To: <20190130123842.6881-1-faiz_abbas@ti.com> References: <20190130123842.6881-1-faiz_abbas@ti.com> Message-ID: <20190210130936.GG16814@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Jan 30, 2019 at 06:08:42PM +0530, Faiz Abbas wrote: > Errata i929 in certain OMAP5/DRA7XX/AM57XX silicon revisions > (SPRZ426D - November 2014 - Revised February 2018 [1]) mentions > unexpected tuning pattern errors. A small failure band may be present > in the tuning range which may be missed by the current algorithm. > Furthermore, the failure bands vary with temperature leading to > different optimum tuning values for different temperatures. > > As suggested in the related Application Report (SPRACA9B - October 2017 > - Revised July 2018 [2]), tuning should be done in two stages. > In stage 1, assign the optimum ratio in the maximum pass window for the > current temperature. In stage 2, if the chosen value is close to the > small failure band, move away from it in the appropriate direction. > > References: > [1] http://www.ti.com/lit/pdf/sprz426 > [2] http://www.ti.com/lit/pdf/SPRACA9 > > Signed-off-by: Faiz Abbas Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: