From: Tom Rini Date: Wed, 13 Feb 2019 07:46:59 -0500 Subject: [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay In-Reply-To: References: <20190213085854.20223-1-manivannan.sadhasivam@linaro.org> <20190213122357.GJ21737@bill-the-cat> Message-ID: <20190213124659.GL21737@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Feb 13, 2019 at 12:31:49PM +0000, Neil Williams wrote: > On Wed, 13 Feb 2019 at 12:24, Tom Rini wrote: > > > > On Wed, Feb 13, 2019 at 02:28:54PM +0530, Manivannan Sadhasivam wrote: > > > > > Current Hikey configuration allows us to store u-boot environment on uSD > > > card. But this will be useless if uSD card is not inserted, hence use > > > the onboard eMMC memory for storing environment at Boot1 partition. > > > While we are at it, let's increase the boot delay to 10s also. > > > > > > Signed-off-by: Manivannan Sadhasivam > > > > It's your board, but do you _really_ want 10s? We moved a whole bunch > > of boards down from 10s a long time ago as 2-3s isn't hard to break in > > to for users nor QA testing > > Yes. 10 seconds is required. 2 or 3 seconds is not enough to break in > for automated QA testing. We are aiming for maximum reliability here. > 2 or 3 seconds causes ~25% failure rate. 5 seconds causes ~10% failure > rate. 10 seconds removes this element. (Estimates based on about a > million LAVA test jobs across 50 different types of devices across > multiple instances in multiple locations.) Interesting. Do you know why it's so hard to catch the boot? -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: