From: Tom Rini Date: Tue, 19 Feb 2019 16:57:59 -0500 Subject: [U-Boot] [U-Boot, V2, 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full In-Reply-To: <20190215233922.15717-1-aford173@gmail.com> References: <20190215233922.15717-1-aford173@gmail.com> Message-ID: <20190219215759.GA13465@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Feb 15, 2019 at 05:39:21PM -0600, Adam Ford wrote: > In order to fully support SPL_OF_CONTROL, we need BSS to be a bit > larger. This patch relocates BSS to SDRAM instead of SRAM which > is similar to how ARMv7 boards (like OMAP2+) do it. > > This means two new variables are required: > CONFIG_SPL_BSS_START_ADDR set to DAVINCI_DDR_EMIF_DATA_BASE > CONFIG_SPL_BSS_MAX_SIZE is set to 0x1080000 which is 1 byte > before the location where U-Boot will load. > > Signed-off-by: Adam Ford This breaks building of omapl138_lcdk, please fix, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: