From: Lukasz Majewski Date: Thu, 21 Feb 2019 23:07:49 +0100 Subject: [U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760 In-Reply-To: <20190221170812.20001-1-krzk@kernel.org> References: <20190221170812.20001-1-krzk@kernel.org> Message-ID: <20190221230749.59420d0c@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 21 Feb 2019 18:08:12 +0100 Krzysztof Kozlowski wrote: > Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. > The appropriate driver for it is USB_ETHER_ASIX. > > The mistake probably came from misinterpretation of commit > e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested > on RECS5250 COM module. This module indeed has Exynos5250 and some > similarities with Arndale 5250 board but the USB/Ethernet chip used > there is apparently different. > > Fixes: f58ad98a621c ("usb: net: migrate USB Ethernet adapters to > Kconfig") Signed-off-by: Krzysztof Kozlowski > > --- > > Not tested. > --- > configs/arndale_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig > index 24422645cbac..b1f20b915889 100644 > --- a/configs/arndale_defconfig > +++ b/configs/arndale_defconfig > @@ -41,4 +41,4 @@ CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_DWC3=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_HOST_ETHER=y > -CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_ASIX=y Reviewed-by: Lukasz Majewski Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: