From: Daniel Lezcano Subject: [PATCH 04/18] clocksource/drivers/exynos_mct: Clear timer interrupt when shutdown Date: Sat, 23 Feb 2019 14:06:52 +0100 Message-ID: <20190223130707.16704-4-daniel.lezcano@linaro.org> References: <20190223130707.16704-1-daniel.lezcano@linaro.org> Return-path: In-Reply-To: <20190223130707.16704-1-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: tglx@linutronix.de Cc: linux-kernel@vger.kernel.org, Stuart Menefy , stable@vger.kernel.org, Marek Szyprowski , Kukjin Kim , Krzysztof Kozlowski , "moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES" , "moderated list:ARM/SAMSUNG EXYNOS ARM ARCHITECTURES" List-Id: linux-samsung-soc@vger.kernel.org From: Stuart Menefy When shutting down the timer, ensure that after we have stopped the timer any pending interrupts are cleared. This fixes a problem when suspending, as interrupts are disabled before the timer is stopped, so the timer interrupt may still be asserted, preventing the system entering a low power state when the wfi is executed. Signed-off-by: Stuart Menefy Reviewed-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski Cc: # v4.3+ Signed-off-by: Daniel Lezcano --- drivers/clocksource/exynos_mct.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 1e325f89d408..d55c30f6981d 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -411,6 +411,7 @@ static int set_state_shutdown(struct clock_event_device *evt) mevt = container_of(evt, struct mct_clock_event_device, evt); exynos4_mct_tick_stop(mevt); + exynos4_mct_tick_clear(mevt); return 0; } -- 2.17.1