From: Chris Packham Date: Thu, 28 Feb 2019 20:53:23 +1300 Subject: [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug Message-ID: <20190228075322.17316-1-judge.packham@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The conversion to DM_SPI managed to break accessing the environment on dreamplug. This is because the environment code relies on being to able to select the SPI device based on the sequence number. Add an alias so that the spi0 bus gets sequence number 0. Reported-by: Leigh Brown Signed-off-by: Chris Packham --- Leigh, Could you test this on your system for me. I'm only able to compile test this myself. arch/arm/dts/kirkwood-dreamplug.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/kirkwood-dreamplug.dts b/arch/arm/dts/kirkwood-dreamplug.dts index a647a65c20a0..ccd74dd7fb33 100644 --- a/arch/arm/dts/kirkwood-dreamplug.dts +++ b/arch/arm/dts/kirkwood-dreamplug.dts @@ -18,6 +18,10 @@ stdout-path = &uart0; }; + aliases { + spi0 = &spi0; + }; + ocp at f1000000 { pinctrl: pin-controller at 10000 { pmx_led_bluetooth: pmx-led-bluetooth { -- 2.21.0