From: Tom Rini Date: Mon, 11 Mar 2019 10:09:37 -0400 Subject: [U-Boot] [PATCH 4/4] Makefile: Correct logic for DM_SCSI + unconverted drivers check In-Reply-To: <20190311122923.4456-4-sr@denx.de> References: <20190311122923.4456-1-sr@denx.de> <20190311122923.4456-4-sr@denx.de> Message-ID: <20190311140937.GU5026@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Mar 11, 2019 at 01:29:23PM +0100, Stefan Roese wrote: > When checking for boards that are enabling a SATA driver that isn't > converted to DM yet we need to be sure to not also trip over boards that > do set CONFIG_AHCI & CONFIG_BLK by itself, as that is not a bug. > > This was detected when converting the Armada XP SATA driver sata_mv.c > to DM with AHCI & BLK support. This warning is still printed without > this patch applied here. > > Signed-off-by: Stefan Roese > Cc: Simon Glass > Cc: Tom Rini > --- > Makefile | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Makefile b/Makefile > index 26db4e7b59..896e0c3350 100644 > --- a/Makefile > +++ b/Makefile > @@ -940,6 +940,7 @@ endif > endif > ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y) > ifneq ($(CONFIG_DM_SCSI),y) > +ifneq ($(CONFIG_BLK)$(CONFIG_AHCI),yy) > @echo >&2 "===================== WARNING ======================" > @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update" > @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release." OK, I think we need to properly clarify the logic, and perhaps I was being too clever trying to catch all of the cases under drivers/ata that aren't converted yet. We have, after your patches, afaict: - MVSATA_IDE - DWC_AHSATA - FSL_SATA - SATA_SIL - SATA_SIL3114 Of these, MVSATA_IDE has no further deps. Everything else depends on LIBATA. Before SATA_MV was converted, everything that was converted depends on DM_SCSI and AHCI. So I made my messages / logic like the above. But perhaps the right answer really is: 1) MVSATA_IDE alone. 2) LIBATA && !AHCI So... we can just re-work the second part of the check logic to be what you added, as all converted drivers under drivers/ata will be both BLK&&AHCI enabled. And also as you note, it's not quite AHCI as the controller in question here isn't AHCI-compatible, but is SATA, so a fixup / rename of some CONFIG checks in code / Kconfig is in order, somewhere, but perhaps after conversion? Also, probably some re-organization of drivers/block, drivers/ide, drivers/ata, drivers/nvme (and common/usb_storage.c) too, to be more consistent. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: