From: Chuanhong Guo Subject: [PATCH] arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED Date: Tue, 12 Mar 2019 16:33:26 +0800 Message-ID: <20190312083326.18029-1-gch981213@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: devicetree@vger.kernel.org Cc: Rob Herring , Mark Rutland , Kevin Hilman , linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, Chuanhong Guo List-Id: devicetree@vger.kernel.org There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status. Signed-off-by: Chuanhong Guo --- .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9a8a8a7e4b53..b5667f1fb2c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port { -- 2.20.1