From: Bartosz Golaszewski Subject: [PATCH v2 0/4] ARM: da850: enable cpufreq in DT mode Date: Fri, 22 Mar 2019 14:31:01 +0100 Message-ID: <20190322133105.5945-1-brgl@bgdev.pl> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Sekhar Nori , Kevin Hilman , Rob Herring , Mark Rutland , David Lechner Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Bartosz Golaszewski List-Id: devicetree@vger.kernel.org From: Bartosz Golaszewski This series adds cpufreq-dt operating points for da850 boards supported with device tree (da850-lcdk, da850-lego-ev3, da850-evm) and also includes a fix for the da850-evm boardfile which checks an unset variable to determine the highest available frequency for cpufreq. Last patch enables CPUFREQ_DT in davinci_all_defconfig. v1 -> v2: - use the VDCDC3_1.2V regulator as cpu-supply on da850-evm Bartosz Golaszewski (2): ARM: davinci: fix cpufreq registration on da850-evm ARM: dts: da850-evm: enable cpufreq David Lechner (2): ARM: dts: da850: add cpu node and operating points to DT ARM: davinci_all_defconfig: Enable CPUFREQ_DT arch/arm/boot/dts/da850-evm.dts | 12 ++++++ arch/arm/boot/dts/da850-lcdk.dts | 31 ++++++++++++++ arch/arm/boot/dts/da850-lego-ev3.dts | 30 +++++++++++++ arch/arm/boot/dts/da850.dtsi | 56 +++++++++++++++++++++++++ arch/arm/configs/davinci_all_defconfig | 1 + arch/arm/mach-davinci/board-da850-evm.c | 12 +----- 6 files changed, 131 insertions(+), 11 deletions(-) -- 2.20.1