From: Stefan Roese Date: Tue, 26 Mar 2019 13:04:00 +0100 Subject: [U-Boot] [PATCH v2] spl: spl_nand.c: Add NAND loading message Message-ID: <20190326120400.20029-1-sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch adds a short message to the SPL NAND loader, which displays the source and destinations addresses including the size of the loaded image, like this: U-Boot SPL 2019.04-rc3-00113-g486efd8aaf (Mar 15 2019 - 14:18:02 +0100) Trying to boot from NAND Loading U-Boot from 0x00040000 (size 0x000a0000) to 0x22900000 I find this message quite helpful - hopefully others do so as well. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Tom Rini --- v2: - Remove #idef as its not needed. With CONFIG_SPL_SERIAL_SUPPORT disabled, all printf's are removed automatically common/spl/spl_nand.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index 6eb190f1ea..e2bcefb111 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -17,6 +17,10 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, { nand_init(); + printf("Loading U-Boot from 0x%08x (size 0x%08x) to 0x%08x\n", + CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, + CONFIG_SYS_NAND_U_BOOT_DST); + nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, (void *)CONFIG_SYS_NAND_U_BOOT_DST); -- 2.21.0