From: Simon Goldschmidt Date: Thu, 28 Mar 2019 21:11:50 +0100 Subject: [U-Boot] [PATCH v3 3/4] arm: socfpga: socrates: make rtc work In-Reply-To: <20190328201151.31583-1-simon.k.r.goldschmidt@gmail.com> References: <20190328201151.31583-1-simon.k.r.goldschmidt@gmail.com> Message-ID: <20190328201151.31583-4-simon.k.r.goldschmidt@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch makes the on-board RTC work on the socfpga_socrates board. This rtc is present on the board, but it does not work (fails with a timeout). This patch adds a weak pull-up on the I2C0-SCL pin connected to the m41t82 RTC on this board. While the SDA line has a pull-up on the pcb, the pull-up on the SCL line seems to be missing. To work around this, enable the weak-pull-up feature on this pin. After applying this patch, the rtc timeout is gone and the 'date' command can access the rtc chip. Signed-off-by: Simon Goldschmidt Reviewed-by: Stefan Roese --- Changes in v3: - pick up missing reviewed-by from v1 Changes in v2: None board/ebv/socrates/qts/iocsr_config.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/ebv/socrates/qts/iocsr_config.h b/board/ebv/socrates/qts/iocsr_config.h index 011fa2bac3..18b9c6ce4d 100644 --- a/board/ebv/socrates/qts/iocsr_config.h +++ b/board/ebv/socrates/qts/iocsr_config.h @@ -108,7 +108,7 @@ const unsigned long iocsr_scan_chain2_table[] = { 0x00018004, 0x06001209, 0x00004000, - 0x20002412, + 0x20042412, 0x00904800, 0x00000030, 0x80000000, -- 2.19.1