From: Lukasz Majewski Date: Thu, 4 Apr 2019 12:26:43 +0200 Subject: [U-Boot] [imx-next PATCH v1 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS In-Reply-To: <20190404102656.21405-1-lukma@denx.de> References: <20190404102656.21405-1-lukma@denx.de> Message-ID: <20190404102656.21405-2-lukma@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de After commit efd0b791069a ("eth: dm: fec: Add gpio phy reset binding") the in-board file definition of ETH PHY reset can be removed. Signed-off-by: Lukasz Majewski --- board/k+p/kp_imx53/kp_imx53.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c index a12ab9107f..3f21d0b4af 100644 --- a/board/k+p/kp_imx53/kp_imx53.c +++ b/board/k+p/kp_imx53/kp_imx53.c @@ -20,7 +20,6 @@ #include "kp_id_rev.h" #define VBUS_PWR_EN IMX_GPIO_NR(7, 8) -#define PHY_nRST IMX_GPIO_NR(7, 6) #define BOOSTER_OFF IMX_GPIO_NR(2, 23) #define LCD_BACKLIGHT IMX_GPIO_NR(1, 1) #define KEY1 IMX_GPIO_NR(2, 26) @@ -211,17 +210,6 @@ int board_init(void) return 0; } -void eth_phy_reset(void) -{ - gpio_request(PHY_nRST, "PHY_nRST"); - gpio_direction_output(PHY_nRST, 1); - udelay(50); - gpio_set_value(PHY_nRST, 0); - udelay(400); - gpio_set_value(PHY_nRST, 1); - udelay(50); -} - void board_disable_display(void) { gpio_request(LCD_BACKLIGHT, "LCD_BACKLIGHT"); @@ -258,8 +246,6 @@ int board_late_init(void) if (ret) printf("Error %d reading EEPROM content!\n", ret); - eth_phy_reset(); - show_eeprom(); read_board_id(); -- 2.11.0