From: Bartosz Golaszewski Subject: [PATCH v3 0/3] ARM: da850: enable cpufreq in DT mode Date: Mon, 8 Apr 2019 09:59:21 +0200 Message-ID: <20190408075924.2284-1-brgl@bgdev.pl> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Sekhar Nori , Kevin Hilman , Rob Herring , Mark Rutland , David Lechner , Adam Ford Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Bartosz Golaszewski List-Id: devicetree@vger.kernel.org From: Bartosz Golaszewski This series adds cpufreq-dt operating points for da850 boards supported with device tree (da850-lcdk, da850-lego-ev3, da850-evm). Last patch enables CPUFREQ_DT in davinci_all_defconfig. v1 -> v2: - use the VDCDC3_1.2V regulator as cpu-supply on da850-evm v2 -> v3: - drop patch 1, as the revision tag is in fact correctly passed to the kernel by u-boot - only enable the 375 operating point for da850-evm as this is the standard frequency for this board Bartosz Golaszewski (1): ARM: dts: da850-evm: enable cpufreq David Lechner (2): ARM: dts: da850: add cpu node and operating points to DT ARM: davinci_all_defconfig: Enable CPUFREQ_DT arch/arm/boot/dts/da850-evm.dts | 13 ++++++ arch/arm/boot/dts/da850-lcdk.dts | 31 ++++++++++++++ arch/arm/boot/dts/da850-lego-ev3.dts | 30 ++++++++++++++ arch/arm/boot/dts/da850.dtsi | 56 ++++++++++++++++++++++++++ arch/arm/configs/davinci_all_defconfig | 1 + 5 files changed, 131 insertions(+) -- 2.21.0