From: Tom Rini Date: Sat, 13 Apr 2019 09:00:48 -0400 Subject: [U-Boot] [PATCH 3/3] arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit In-Reply-To: References: <20190411103336.11356-1-sr@denx.de> <20190411103336.11356-3-sr@denx.de> Message-ID: <20190413130048.GI4664@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 12, 2019 at 07:08:40PM +1200, Chris Packham wrote: > On Thu, 11 Apr 2019, 10:33 PM Stefan Roese, wrote: > > > We have run now multiple times into size issues with the openrd > > board port. To finally fix this, this patch now moves the U-Boot size > > from 0x6.0000 to 0x8.0000, giving enough space for the next time. > > > > This also changes the environment location and potentially the > > MTD partitioning, but I see no better fix for now. Especially since > > this board does not have an active maintainer. > > > > Signed-off-by: Stefan Roese > > Cc: Chris Packham > > > One alternative option I looked at was trimming down the dtb to drop the > nodes that aren't used in u-boot. This might just get it under the 0x60000 > limit ... for a while. > > I agree that this is the best approach in leiu of anyone maintiaining the > board. Once this is applied the openrd boards can be reenabled in travis. > > Reviewed-by: Chris Packham Please note the board is currently orphaned and excluded from travis builds due to the size problem. So if someone is going to address this, I want to see the board un-orphaned too (and travis updated to build it again), thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: