From: Mika Westerberg Subject: Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin Date: Mon, 15 Apr 2019 22:25:09 +0300 Message-ID: <20190415192509.GH2654@lahna.fi.intel.com> References: <20190415055358.9269-1-chiu@endlessm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190415055358.9269-1-chiu@endlessm.com> Sender: linux-kernel-owner@vger.kernel.org To: Chris Chiu Cc: andriy.shevchenko@intel.com, heikki.krogerus@linux.intel.com, drake@endlessm.com, linus.walleij@linaro.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux@endlessm.com List-Id: linux-gpio@vger.kernel.org On Mon, Apr 15, 2019 at 01:53:58PM +0800, Chris Chiu wrote: > The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not > responsive after suspend/resume. The following error message > shows after resume. > i2c_hid i2c-ELAN1200:00: failed to reset device. > > On these laptops, the touchpad interrupt is connected via a GPIO > pin which is controlled by Intel pinctrl. After system resumes, > the GPIO is in ACPI mode and no longer works as an IRQ. > > This commit saves the HOSTSW_OWN value during suspend, make sure > the HOSTSW_OWN mode remains the same after resume. > > Signed-off-by: Chris Chiu Acked-by: Mika Westerberg