From: Peng Fan Date: Wed, 17 Apr 2019 09:41:20 +0000 Subject: [U-Boot] [PATCH 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 In-Reply-To: <20190417095422.5641-1-peng.fan@nxp.com> References: <20190417095422.5641-1-peng.fan@nxp.com> Message-ID: <20190417095422.5641-2-peng.fan@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Ye Li On mx7ulp B0, beside bank 0 and 1, the fuse bank 9, 10, 28 are changed to Redundancy mode not ECC, so they can support to program different bits of a word in multiple times. Signed-off-by: Ye Li Signed-off-by: Peng Fan --- drivers/misc/mxc_ocotp.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index f84fe88db1..33ea31135c 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -354,13 +354,17 @@ static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word, /* Only bank 0 and 1 are redundancy mode, others are ECC mode */ if (bank != 0 && bank != 1) { - ret = fuse_sense(bank, word, &val); - if (ret) - return ret; - - if (val != 0) { - printf("mxc_ocotp: The word has been programmed, no more write\n"); - return -EPERM; + if ((soc_rev() < CHIP_REV_2_0) || + ((soc_rev() >= CHIP_REV_2_0) && + bank != 9 && bank != 10 && bank != 28)) { + ret = fuse_sense(bank, word, &val); + if (ret) + return ret; + + if (val != 0) { + printf("mxc_ocotp: The word has been programmed, no more write\n"); + return -EPERM; + } } } #endif -- 2.16.4