From: Alice Michael Date: Wed, 24 Apr 2019 05:20:53 -0700 Subject: [Intel-wired-lan] [next PATCH S5 08/10] i40e: Check if the BAR size is large enough before writing to registers In-Reply-To: <20190424122055.27896-1-alice.michael@intel.com> References: <20190424122055.27896-1-alice.michael@intel.com> Message-ID: <20190424122055.27896-8-alice.michael@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: From: Adam Ludkiewicz This patch fixes the problem with a kernel panic occurring when trying to bind the i40e driver to a non-i40e port. The problem is fixed by checking if the BAR size in the device is large enough by reading the highest register. Signed-off-by: Adam Ludkiewicz --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5716f8fe06ed..d640da4a8835 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -14696,7 +14696,17 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pf->ioremap_len = min_t(int, pci_resource_len(pdev, 0), I40E_MAX_CSR_SPACE); - + /* We believe that the highest register to read is + * I40E_GLGEN_STAT_CLEAR, so we check if the BAR size + * is not less than that before mapping to prevent a + * kernel panic. + */ + if (pf->ioremap_len < I40E_GLGEN_STAT_CLEAR) { + dev_err(&pdev->dev, "Cannot map registers, bar size 0x%X too small, aborting\n", + pf->ioremap_len); + err = -ENOMEM; + goto err_ioremap; + } hw->hw_addr = ioremap(pci_resource_start(pdev, 0), pf->ioremap_len); if (!hw->hw_addr) { err = -EIO; -- 2.19.2