From: Tom Rini Date: Wed, 24 Apr 2019 09:21:30 -0400 Subject: [U-Boot] [PATCH 3/3] arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit In-Reply-To: <20190413130048.GI4664@bill-the-cat> References: <20190411103336.11356-1-sr@denx.de> <20190411103336.11356-3-sr@denx.de> <20190413130048.GI4664@bill-the-cat> Message-ID: <20190424132130.GL31207@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, Apr 13, 2019 at 09:00:48AM -0400, Tom Rini wrote: > On Fri, Apr 12, 2019 at 07:08:40PM +1200, Chris Packham wrote: > > On Thu, 11 Apr 2019, 10:33 PM Stefan Roese, wrote: > > > > > We have run now multiple times into size issues with the openrd > > > board port. To finally fix this, this patch now moves the U-Boot size > > > from 0x6.0000 to 0x8.0000, giving enough space for the next time. > > > > > > This also changes the environment location and potentially the > > > MTD partitioning, but I see no better fix for now. Especially since > > > this board does not have an active maintainer. > > > > > > Signed-off-by: Stefan Roese > > > Cc: Chris Packham > > > > > > One alternative option I looked at was trimming down the dtb to drop the > > nodes that aren't used in u-boot. This might just get it under the 0x60000 > > limit ... for a while. > > > > I agree that this is the best approach in leiu of anyone maintiaining the > > board. Once this is applied the openrd boards can be reenabled in travis. > > > > Reviewed-by: Chris Packham > > Please note the board is currently orphaned and excluded from travis > builds due to the size problem. So if someone is going to address this, > I want to see the board un-orphaned too (and travis updated to build it > again), thanks! Anyone? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: