From: Andriy Shevchenko Subject: Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin Date: Fri, 26 Apr 2019 15:50:31 +0300 Message-ID: <20190426125031.GQ9224@smile.fi.intel.com> References: <20190415055358.9269-1-chiu@endlessm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Linus Walleij Cc: Chris Chiu , Mika Westerberg , Heikki Krogerus , Daniel Drake , "open list:GPIO SUBSYSTEM" , "linux-kernel@vger.kernel.org" , linux@endlessm.com List-Id: linux-gpio@vger.kernel.org On Tue, Apr 23, 2019 at 12:38:17PM +0200, Linus Walleij wrote: > On Mon, Apr 15, 2019 at 7:54 AM Chris Chiu wrote: > > > The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not > > responsive after suspend/resume. The following error message > > shows after resume. > > i2c_hid i2c-ELAN1200:00: failed to reset device. > > > > On these laptops, the touchpad interrupt is connected via a GPIO > > pin which is controlled by Intel pinctrl. After system resumes, > > the GPIO is in ACPI mode and no longer works as an IRQ. > > > > This commit saves the HOSTSW_OWN value during suspend, make sure > > the HOSTSW_OWN mode remains the same after resume. > > > > Signed-off-by: Chris Chiu > > This v3 patch applied with Mika's ACK. Hmm... It's supposed to go along with our PR. -- With Best Regards, Andy Shevchenko