From: Tom Rini Date: Sat, 27 Apr 2019 10:45:22 -0400 Subject: [U-Boot] [U-Boot, v3, 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded In-Reply-To: <20190412165448.1788-2-afd@ti.com> References: <20190412165448.1788-2-afd@ti.com> Message-ID: <20190427144522.GF31207@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 12, 2019 at 12:54:42PM -0400, Andrew F. Davis wrote: > On HS devices the 512b region of reset isolated memory called > MCU_PSRAM0 is firewalled by default. Until SYSFW is loaded we > cannot use this memory. It is only used to store a single value > left at the end of SRAM by ROM that will be needed later. Save > that value to a global variable stored in the .data section. > This section is used as .bss will be cleared between saving > this value and using it. > > Signed-off-by: Andrew F. Davis > Reviewed-by: Andreas Dannenberg > Reviewed-by: Lokesh Vutla Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: