From: Peter Korsgaard Date: Fri, 3 May 2019 16:25:21 +0200 Subject: [Buildroot] [PATCH 2/2] config: add defconfig for orangepi-r1 In-Reply-To: <20190503142522.26401-1-peter@korsgaard.com> References: <20190503142522.26401-1-peter@korsgaard.com> Message-ID: <20190503142522.26401-2-peter@korsgaard.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a 2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided through a Realtek RTL8189FTV (no mainline driver, not supported). Signed-off-by: Peter Korsgaard --- DEVELOPERS | 1 + board/orangepi/orangepi-r1/boot.cmd | 8 ++++++ board/orangepi/orangepi-r1/genimage.cfg | 36 ++++++++++++++++++++++++ board/orangepi/orangepi-r1/linux-extras.config | 11 ++++++++ board/orangepi/orangepi-r1/readme.txt | 29 ++++++++++++++++++++ configs/orangepi_r1_defconfig | 38 ++++++++++++++++++++++++++ 6 files changed, 123 insertions(+) create mode 100644 board/orangepi/orangepi-r1/boot.cmd create mode 100644 board/orangepi/orangepi-r1/genimage.cfg create mode 100644 board/orangepi/orangepi-r1/linux-extras.config create mode 100644 board/orangepi/orangepi-r1/readme.txt create mode 100644 configs/orangepi_r1_defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 6ccb0afaf6..95ebfcbeea 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1737,6 +1737,7 @@ F: configs/minnowboard_max_defconfig F: configs/nexbox_a95x_defconfig F: configs/openblocks_a6_defconfig F: configs/orangepi_pc_defconfig +F: configs/orangepi_r1_defconfig F: configs/pandaboard_defconfig F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig diff --git a/board/orangepi/orangepi-r1/boot.cmd b/board/orangepi/orangepi-r1/boot.cmd new file mode 100644 index 0000000000..e927b01e82 --- /dev/null +++ b/board/orangepi/orangepi-r1/boot.cmd @@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-r1.dtb + +bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg new file mode 100644 index 0000000000..01e2c0adc4 --- /dev/null +++ b/board/orangepi/orangepi-r1/genimage.cfg @@ -0,0 +1,36 @@ +# Minimal SD card image for the OrangePi R1 +# +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-orangepi-r1.dtb", + "boot.scr" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/orangepi/orangepi-r1/linux-extras.config b/board/orangepi/orangepi-r1/linux-extras.config new file mode 100644 index 0000000000..47ba88f670 --- /dev/null +++ b/board/orangepi/orangepi-r1/linux-extras.config @@ -0,0 +1,11 @@ +# spi nor +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_M25P80=y + +# ondemand cpufreq governor +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y + +# USB ethernet +CONFIG_USB_RTL8152=y diff --git a/board/orangepi/orangepi-r1/readme.txt b/board/orangepi/orangepi-r1/readme.txt new file mode 100644 index 0000000000..8266499366 --- /dev/null +++ b/board/orangepi/orangepi-r1/readme.txt @@ -0,0 +1,29 @@ +OrangePi R1 + +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the OrangePi R1. With the current configuration +it will bring-up the board, and allow access through the serial console. + +How to build it +=============== + +Configure Buildroot: + + $ make orangepi_r1_defconfig + +Compile everything and build the SD card image: + + $ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig new file mode 100644 index 0000000000..34a400e78c --- /dev/null +++ b/configs/orangepi_r1_defconfig @@ -0,0 +1,38 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_TARGET_GENERIC_HOSTNAME="OrangePi_R1" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi R1" +BR2_SYSTEM_DHCP="eth0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.38" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-orangepi-r1" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-r1/linux-extras.config" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_r1" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-r1/boot.cmd" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-r1/genimage.cfg" + +# spi flash support +BR2_PACKAGE_MTD=y -- 2.11.0