From: Tudor.Ambarus at microchip.com Date: Fri, 10 May 2019 11:01:38 +0000 Subject: [U-Boot] [PATCH v2 06/10] ARM: at91: sama5: add common environment for QSPI In-Reply-To: <20190510110113.2444-1-tudor.ambarus@microchip.com> References: <20190510110113.2444-1-tudor.ambarus@microchip.com> Message-ID: <20190510110113.2444-7-tudor.ambarus@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Cyrille Pitchen Use the same memory layout as we use for the NAND boot on the other boards. QSPI flashes are present on the following boards: sama5d2_xplained RevB: 32 Mbyte flash (mx25l3273fm2i-08g) sama5d2_xplained RevC: 8 Mbyte flash (sst26vf064b-104i/sn) sama5d27_som1_ek: 8 Mbyte flash (sst26vf064b-104i/sn) sama5d2_ptc_ek: 8 Mbyte flash (sst26vf064b-104i/sn) The 8 Mbyte limit is enough to cope with the memory layout used in the NAND boot. rootfs exceeds the 8 Mbyte limit and will stay in eMMC in the sama5d2_xplained case. The final scope is to use a single memory layout for all boot medias. Signed-off-by: Cyrille Pitchen [tudor.ambarus at microchip.com: change memory layout, add commit message] Signed-off-by: Tudor Ambarus --- v2: new patch include/configs/at91-sama5_common.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 30c6cd47cac2..fc46540a10ab 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -72,6 +72,14 @@ "sf read 0x21000000 0x60000 0xc000; " \ "sf read 0x22000000 0x6c000 0x394000; " \ "bootz 0x22000000 - 0x21000000" +#elif CONFIG_QSPI_BOOT +#define CONFIG_ENV_OFFSET 0x140000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x21000000 0x180000 0x80000; " \ + "sf read 0x22000000 0x200000 0x600000; " \ + "bootz 0x22000000 - 0x21000000" #endif #endif -- 2.9.5